Installation Guide

Always wear eye, ear and respiratory protection

when doing any home improvement project. Cut

and mill in a well-ventilated area. WPB MTrim

boards are not designed for structural use.

WPB is subject to expansion and contraction.

Allow the product to acclimate in the room

where they’ll be installed for 48 hours prior to

installation.

Cleaning:

Clean the surface and back of molding of dust and dirt with a sponge or clean cloth, make sure that the

molding is completely dry before installation. You can clean WPB MTrim with most major household clea-

ners, it should be applied and immediately wiped dry.

How Do I Splice a Molding?

To span longer lengths, you may have to splice

moldings. Mitre the joining ends at 45° angles

from front to back. One member will overlap the

other in a scarf joint, creating a vertical face

seam in the nished installation. It is advisable

to join molding pieces over wall stud for additio-

nal strength.

Install moldings

m-trim.com