Installation Guide

Take measures of walls, windows and openings
in the room and round up to the nearest foot. It
is recommended to add 15% for waste.
Must moldings are installed with a 90 degree
angle joint. Cut 2 pieces of molding with a 45
degree angle each piece and together they
make 90-degree angle. Use WPB Cement to
glue the ends of the boards. On both sides place
fasteners 2” from the end.
First install the longest pieces. If you are
right-handed it would be better installing coun-
terclockwise, if you are left-handed, it would be
better installing clockwise.
Along the back of molding apply construction
adhesive. Press molding against the wall. To
secure molding, use nishing nails into place.
Apply caulk in remaining gaps and smooth with
putty knife or nger. Use caulk or light weight
spackle to ll in holes. Use latex paint to touch‐
up molding as needed.
Install moldings
1
2
m-trim.com