User's Guide

ManualsBrandsMTN ManualsComputers & AccessoriesWireless Router

1.ᡆ૷ተሮφ200*145mmθኋᔶተሮφ1000*145θޢᐤf2mm.

2.ᶆ䍞φ105gӐ㊿㓮

3.দ࡭㾷≸φ഑㢨দ࡭

4.㻻䇘㾷≸φ 伄⩪ᣎθሷ䶘ሷᓋ൞ཌ

5.৕ᶆᯏ༺⨼ᐛ㢰ൽ㜳┗䏩ROHS2.0θHFWEEEⲺ㾷≸.

MANUAL

DATE:

2022-04-22

1:1

N/A

A0 DRAW

CHECK

APPD1/1

PART NO.:MODEL:

SHEET

SCALE

FINISH

UNITĆS

MATĆL

mm VER:

TITLE:

CUSTOMER:

␧൩ᐸ䗾㞴⭫ᆆᴿ䲆ޢ

SHENZHEN MTN ELECTRONICS CO.,LTD

зឝ᱄

䛢㄁ᒩ

HNK

MTO-WR1810AX

Step 3: Configure your internet connection

Please select your Internet connection type.

Note: The password you entered in this step is not the Wi-Fi pass-

word, it is the password for the router’ s management interface. If

you cannot log into the web UI of the router, refer to the Q1 in

FAQ.

Step 2: Open the configuration wizard page

If this is the first time using the router, the page will automatically

jump to the configuration wizard page. If the configuration wizard

page doesn’ t show up, you can click the “Settings>>Wizard” for

your initial setup.

I. Set up the new router for internet access

Step 1: Enter the IP address.

1.Launch a web browser from a computer or mobile device that is

connected to the network.

2.Enter 192.168.0.1 to open a login window.

3.In the Password field, type the password to log into the manage-

ment interface. The default admin password is empty.

Step 5: Set your device admin password

By default, your new device does not have a password configured

for administrator access to the Web-based configuration utility. To

secure your new device, please create a password below.

Step 6: Check out the setting summary and finish initial setting

A setting summary will show up to you for checking. If everything is

okay, click on “Next” to finish the initial setting steps.

Guest Network

1.Please log in to the management page. The IP address is

“192.168.0.1” .

2.Click “Settings>>Wireless>>Guest Zone” to the guest network

setting page.

3.Configure the settings for your guest, including time limit, internet

resources, 2.4GHz settings.

4.Click on the “Save” button to save your configuration settings.

Then you can separate your network route to your guest.

5.If you want more settings of the dual band, click on “Advance Set

tings” . Then the advance settings interface will show on.

6.Click on the “Save” button to save your configuration settings.

Scan to download the HNK Router App or get it on App Store or

Google Play.

Dual Band Settings

1.Please log in to the management page. The IP address is

“192.168.0.1” .

2.Click “Settings>>Wireless” to the wireless setting page.

3.Turn off the “Smart Connect” button, then show on the dual band

settings.

4.Configure the router 2.4G or 5G Wi-Fi SSID and password.

Step 4: Set up your Wi-Fi

To setup a Wi-Fi network you need to give your Wi-Fi network a

name(SSID) and password.

ሷᓋ

Package Contents

Wireless Router × 1

Power Adapter × 1

Quick Installation Guide × 1

Network cable × 1

24hour Online

After-Sales Service

Scan QR Code To Visit

https://hnk.afterservice.vip

HUIZHOU MTN WEIYE TECHNOLOGY DEVELOPMENT CO.,LTD.

Address: NO.2 Huitai Road,Huinan High-tech Industrial Park,Huiao Avenue,Huizhou City,

Guangdong Province,China

More detailed instruction can be downloaded from www.hnknet.com

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and

operated with minimum distance 20cm between the radiator & your body.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may

cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authori-

ty to operate the equipment.

HNK Router App User Guide Manage the Dual-band feature on the HNK Router App

1.Download the HNK Router

App and connect to the wifi

network to get started with

Setup Wizard

Note：Set up the router with the web browser before using the APP to manage your Wifi network

2.Please select "Dynamic

(DHCP)" for the internet

connection type

3.Set the WiFi name and

Password for the network

4.Please confirm your network

settings and finish setting up

1.Login to the HNK

Router App to start

managing your network

2.As shown is the

detailed data of your

network

3.Find "Basic

Configuration" in the

selection menu

4.As shown are the

options under "Basic

Settings"

5.Select "WiFi Advanced

Settings" to start manage

the dual-band feature of

your router

Quick Installation Guide

RAX1810 Smart Wi-Fi Router

More Features

In addition to some of the settings described above, there are more

functions. Including QOS, Firewall, Port Mapping, Static Route, etc.

For more instructors, please refer to the website: https://hnk.after-

service.vip

II. Hardware

2.Q: How can I reset the router?

A: Method 1: When the power is on, sting the router's "Reset" pin-

hole for 10 seconds to restore the factory settings.

Method 2: Please log in to the management page (IP address is

“192.168.0.1” ) and click the “Management>>System Admin>>Sys-

tem” , then click on “Restore Factory” button to restore the factory

setting.

3.Q: How can I change my admin password?

A: Please log in to the management page (IP address is

“192.168.0.1” ) and click the “Management>>System Admin” . In

this interface, you can change the admin password.

4.Q: How to change my network name and password?

A: Please log in to the management page (IP address is

“192.168.0.1” ) and click the ” Settings>>Wireless” . In this

interface, you can change your network name and password.

5.Q: How can I select my connection type?

A: Please log in to the management page (IP address is

“192.168.0.1” ) and click the “Settings>>Internet” . In this Interface,

you can choose your connection type.

III. FAQ

1.Q: Why can’ t I log in to the web UI of the router?

A: Step 1: Please confirm that your devices connect to the

HNK-AX1800 router.

Step 2: Please confirm if your IP address is “192.168.0.1” .

Step 3: Please confirm both the user name and password is

“admin” .

ሷ䶘

17.P6.XXXXXX

↚ᶗ⸷ᢡᨅ޻ᇯѰ䗾㞴ᯏθṲᕅCODE128θተሮ㓜35*5mmθ

ᒬ൞сᯯᱴ⽰ᯏθᆍ։Arial 6pt

ᯏфሯᓊבᓊ୼㾷ж㠪έ

Power LED

WPS LED

5G LED

2.4G LED

Internet LED

LAN LED

Reset

LAN Ports

WAN Port

WPS Button

DC in

814.&4)

䧗炐愉

8"/䧗炐愉

-"/䧗炐愉

䅻◾辑炐鳀䫙鵠鲋

ꠇ憭辑炐丘䩺◬◎

簪愉ꠇ憭辑炐丘䩺◬◎

挝愅辑炐粠簇┘鵠䡝儔鳀䫙

簪愉䅻◾辑炐鳀䫙鵠槖

篍荈䅻◾辑炐粠簇䷚꤄仰嫏鳀䫙JOUFSOFU

簪荈篍荈

㛄⛤㯿

814.&4)䧝꜄

榫◇仰篪阻㚷䒍鵮鳀粠ն

榫◇䕄㛄⭴⮽ⷣ阻糌ն