Product Manual

Included
1. Confirm that your Pressure Washer and fittings are compatible
with the Magnum 28 Kit.* Confirm that your quick connects are
locked in tightly.
2. Mix your preferred detergent with fresh, clean water in the PF22
bottle and shake contents thoroughly.
3. Screw the nozzle onto your full PF22 bottle and attach it to your
pressure washing setup.
4. Foam away!
5. When foaming is complete, remove the PF22 bottle and pull the
trigger on your spray gun to allow clean water to flow through the
PF22 filter and flush any impure fluids or suspended particles that
may cause clogging.
Repair Kit: #41.5001
Replacement Parts*
Service must be done exclusively by skilled workers using only original Veloci
replacement parts. WARNING: The components need to be properly reassembled
to restore to the original conditions of the product. Veloci is not responsible or
liable for any loss, damage or injury, direct or consequential, arising from
improper, use, reassembly or service by unskilled workers and/or users.
Foam is great for cleaning:
Service
Instructions
*A pressure washer with a minimum of 1.4 GPM flow and 1,100 PS is strongly
advised for the product to operate correctly.
Bottle: #37.0253
Filter: #36.0226
MTM Hydro warrants that this product will be free from material and workmanship
defects under normal use for the period of ninety (90) days. "Normal use" does not
include use in excess or recommended maximum speeds, flows, pressures,
vacuums, and temperatures or use requiring handling of fluids not compatible
with component. Warranty does not cover freight, freezing, misapplication, or
negligence damage.
Warranty
Why Foam?
Filter Replacement
Replacing the filter on the PF22 has never been easier! In just 4 simple steps
you can be up and running in under 2 minutes, using only two tools (hex key
& pliers/allen wrench).
1. Use hex key to pop the silver pin located in the nozzle. Once you have it out a
1/4", use the piers to completely remove it.
2. Remove filter by sticking the hex key through the front end of the nozzle.
3. Reinsert your new filter.
4. Put it all back together. Give yourself a pat on the back, you're done!
The MTM Hydro Foam Cannon is the standard in the foaming industry. Perfect for
all skill levels, this tool will save you time and money. Simply attach the foam cannon
to your pressure washer using one of the included fittings and you are up and
foaming. The PF22.2 offers an all-new standing bottle, adjustable fan blades, and
convertible spray patterns (vertical or horizontal), as it throws thick foam onto your
vehicle, house, fence, driveway, roof, locker room, hog barn, or anything else you
want cleaned. The air intake knob on top allows for more or less soap to be drawn
through the chamber, increasing or decreasing your foam’s thickness.
Best of all! Our foamers are repairable. Need parts? Give us
a call and we can get you replacement parts in no time.
*included parts may vary
Bottle: #37.5022
PF22.2 SGS28
1/4" & 3/8"
SS Plug
1.1 & 1.25mm
Orifice
1/4" SS
Coupler