Installation Instructions

INSTALLATION INSTRUCTIONS
-02- -03--01-

DESCRIPTION

FEATURES
WFSC8

SPECIFICATIONS

INSTALLATION
Single Switch W
iring Schematic
Wireless Home Automation
Blue LED indicates the current status of scene
The WFSC8 is our industry's first WIFI Wireless Scene Controller. It can be controlled
by manual or through the App. After connect 2.4GHz WIFI you can remote control
set them as your needs.
8-Button Scene Controller
Interchangeable Color Face Plate
Voltage.............................................................................................. 120VAC, 60Hz
Incandescent..................................................................................................1000W
Resistive................................................................................................1800W(15A)
Motor.............................................................................................................. 1/2 HP
Standard Ballast............................................................................................1200VA
Electronic Ballast...................................................................................................5A
Operating Temperature.........................................................32°F~104°F(0°C~40°C)
You can Turns your devices on or off at any time or anywhere have Internet using
the free Tuya App on your smartphone
Tuya Smart App Control
1. Download Tuya Smart app from the App Store or Google Play.
2. Connect mobile device to your 2.4GHz WIFI network. Please note this
Smart switch can only be connected to 2.4GHz network.
3. Launch Tuya and follow the in-app instructions to connect the WIFI switch
to your network.
Indoor use only
Screw Torque...............................................................................................20 lbf-in
Protocol.........................................................................................IEEE 802.11b/g/n
Wireless Type.............................................................................................. 2.4GHz
(Type 1.B action, operating control)
turn on/off light ,countdown, make weekly plan and there are seven scenes you can
Light
Red
Black
Green
White
120 VAC
60 Hz
Wiring Diagram:
HOT
LOAD
TRAVELER
NEUTRAL
AC
ON/OFF
For the 8-Button Scene Controller, seven of them represent different scene you can

BUTTON INFORMATION
Scene Button 1
Scene Button 3
Scene Button 5
Scene Button 7
Scene Button 2
Scene Button 4
Scene Button 6
set them as your needs by APP
1. Connect the 8-button scene controller as shown in the wiring diagram: Black lead
2. Check connections to be sure they are tight and no bare conductors are exposed.
3. Put the controller into the outlet box carefully.
4. Use the supplied screws to mount the controller into wall box.
5. Attach the wall plate.
6. Restore power to the circuit breaker and test the system.
to hot wire, white lead to neutral wire, red lead to load wire, blue lead to traveler wire.
3-Way Wiring Schematic using one WFSC8 and one 3-way Auxiliary Switch
White(Netural)
Red(Load)
Traveler(Blue)
SWITCH
WFSC8
Green(Groud)
Black(Hot)
White(Netural)
Traveler(Blue)
Red(Load)
SWITCH
Black(Hot)
Green(Groud)
White(Netural)
Traveler(Blue)
Red(Load)
SWITCH
Black (Hot)
Green(Groud)
Wiring Method 1
Wiring Method 2
WFSC8
WFSC8
Wiring Method 3
Panel replacement
Button set panel now can be replaced as your wish . The operation is very simple,
you just need to push the panel down and get it out then put on the new panel.
Push down
Take it out
Wiring Diagram:
AC
ON/OFF
AC
ON/OFF

OPERATION
LED Indicator
7 Scene Buttons
ON/OFF Button
Manual Control
The Scene Controller paddle on the WFSC8 allows the user to:
1, Turn ON/OFF the connected lighting.
a, To turn the connected lighting ON: Short press the ON/OFF button
b, To turn the connected lighting OFF: Short press the ON/OFF button
2, Manual control the Scene button
Short press one time on the scene button, after one second the triggered button
will associate scenario 1, then corresponding indicator light turn on for 1 second
and then off.
Short press twice on the scene button that will trigger button associated scenario
2 at once, then corresponding indicator light turn on for 1 second and then off.
a. Login the Tuya
b. Click the " Add Device"
c. Select the "Scenario Switch"
d. Click the bottom button
e. Enter your Wifi password f. Finished