RD41425500C/REV-A WIRELESS EDGE INSTALLATION INSTRUCTIONS FOR MT-120021 AND MT-120021/A Item: 5 Washer spring M5 Qty: 8 Item: 8 Washer flat M8 Qty: 3 Item: 9 Item: 10 Washer spring M8 Nut M8 Qty: 3 Qty: 3 Item: 15 Arm bracket 2 Qty: 1 Item: 7 Bolt M8x40 Qty: 3 Item: 6 Nut M5 Qty: 8 Item: 4 Washer flat M5 Qty: 8 Item: 12 Washer flat M10 Qty: 1 Item: 3 Antenna base bracket Qty: 2 Item: 2 Pole band Qty: 4 Item: 1 Pole bracket Qty: 1 Item: 11 Bolt M10x50 Qty: 1 Item: 13 Washer spring M10 Qty: 1 I
RD41425500C/REV-A WIRELESS EDGE ANTENNA 3 x4 4 x4 5 x4 6 x4 4 x4 5 x4 6 3 STEP 1 Attach items 3 to the back of antenna using hardware items 4 ,5 and 6 as shown. SHEET 2 OF 6 11 Hamelacha St. , Afek Industrial Park, Rosh Ha’ayin 48091, Israel Fax: 972-3-9025051, Tel: 972-3-9025050 www.mtiwe.
RD41425500C/REV-A WIRELESS EDGE 2 2 7 1 15 10 8 9 14 13 12 B 17 16 11 A STEP 2 Insert 2 bands, item 2 , into part 1 as shown. Do not fasten the bands. Connect bracket item 16 to clamp item 1 using hardware Items 7, 8, 9 and 10. do not tighten the nut. Connect dial item 17 and bracket item 15, as shown, using hardware items 11, 12, 13 and 14 . Do not tighten the nut. SHEET 3 OF 6 11 Hamelacha St. , Afek Industrial Park, Rosh Ha’ayin 48091, Israel Fax: 972-3-9025051, Tel: 972-3-9025050 www.mtiwe.
RD41425500C/REV-A WIRELESS EDGE 7 8 9 10 3 15 STEP 3 Connect the module, assembled in step 2, with bracket item 15 to the top bracket item 3 on the antenna, as shown, using hardware items 7, 8, 9 and 10. Do not tighten the nut. SHEET 4 OF 6 11 Hamelacha St. , Afek Industrial Park, Rosh Ha’ayin 48091, Israel Fax: 972-3-9025051, Tel: 972-3-9025050 www.mtiwe.
RD41425500C/REV-A WIRELESS EDGE 1 POLE 3 2 1 7 8 9 10 STEP 4 Connect bracket item 1 to pole using bands item 2. Use tightening torque of 7Nm. SHEET 5 OF 6 STEP 5 Connect bottom bracket item 3 on antenna to bracket 1 on pole using hardware items 7, 8, 9 and 10. Do not tighten the nut. Connect the top part of antenna to pole by tightening the two bands items 2 around the pole. Use tightening torque of 7Nm 11 Hamelacha St.
RD41425500C/REV-A WIRELESS EDGE 11 7 7 T ilt Ang le 7 STEP 6 Align the antenna tilt by stretching the top mount and reading the angle on the "dial", item 17 . Tighten bolts item 7 with torque of 24Nm, bolt item 11 with torque of 50Nm . SHEET 6 OF 6 11 Hamelacha St. , Afek Industrial Park, Rosh Ha’ayin 48091, Israel Fax: 972-3-9025051, Tel: 972-3-9025050 www.mtiwe.