User Manual

ANTENNA
POLE
2.75"- 3.5"
ANTENNA
POLE
RD41423900C/REV-C
SHEET 2 OF 2
7
6 8 9 10
x2
x2
x2
x2
STEP 3
Tighten the antenna to the pole, using
Items 7,6,8,9,10 as shown .
Use tightening torque of 76 kg-cm .
STEP 4
Adjust the reguired tilt using the angular
Scale and fasten all screws and nuts at
The required position.
Use tightening torque of 68 kg-cm .
Installation Kit
ITEM DESCRIPTION QTY
1 ELEVATION BRACKET 1
2 WASHER FLAT ¼” 9
3 WASHER SPRING ¼” 9
4NUT ¼” 9
5 POLE BRACKET MECH ASSY 1
6 BOLT CARRIAGE 5/16”x6” STEEL 2
7 U BRACKET 1
8 WASHER FLAT 5/16” STEEL 2
9 WASHER SPRING 5/16” STEEL 2
10 NUT HEX 5/16” STEEL 2