Specification Sheet

Eective 010119 ©2019 by MTI Baths, Inc. Modification Rights Reserved.
ELECTRICAL COMPONENTS & SPECIFICATIONS
Required Electrical Service - 110 Volt
Hydrotherapy Package Components Included GFCI
Air Massage heated blower 1-15 amp
Air Massage Elite heated blower, chromatherapy 1-15 amp
For electrical requirements of tub options, see specific options specs
CSA Certified C/US; ANSI Z124.1 for plastic tubs and ANSI 112.19.7 for whirlpool
components.
See the "Designer Collection Tubs Installation & Operation Manual"
included with tub delivery or go to:
mtibaths.com/support/installation
for all the information necessary to install and operate the tub.
MTI's Customer Service Department is available
Monday-Friday 8am-6pm EST at 800-783-8827 or
[e-mail]
to answer any questions pertaining to ordering or installation.
CSA # MTDS-182
IMPORTANT ORDERING & INSTALLATION INFORMATION:
• Before ordering or installing, please consider future access to equipment.
• This freestanding tub comes equipped with an access panel on the
drain side (shown to the right) for installation of waste and overflow.
If the tub will be viewable from all angles, MTI will upon request
eliminate the access panel. Please note, installation will be slightly
more dicult.
• Opptional pedestal base ships loose with tub and does not increase
overall height.
• When ordering an air bath, the air blower must be remote mounted.
• Radiance placed on floor locations will affect placement of air jets.
• If tub is equipped with Chromatherapy, the control box must be remote
mounted.
• Specifications and configurations are subject to change without notice.
• Measurements are +1/2" and are subject to change without notice.
• Measurements herein supersede all others published prior to publication
date shown below.
GENERAL SPECIFICATIONS:
Material - Acrylic
Installation - Freestanding
Soaker Weight - 121 lbs / 55 kg
Maximum Fill - 90 gal to overflow
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
Melinda 6
71.25" x 35.5" x 23.5"
Designer Collection Tubs
Model # 182
213⁄8"
61"
49"
16"
20"
114°
11½"
4"
4"
23"
35
½"
71¼"
6¼"
4½"
357⁄8"
25¼"
49"
56"
3" H
35¼" W
Optional one-piece pedestal base. Does not increase height of tub.
23½
"
The Melinda 6 features a 4.5"-wide flat deck surface on the drain side for mounting faucetry.
The drain & overflow assembly is concealed between the walls of the tub, eliminating the need for an exposed drain kit.
Shown with Air Massage Package.