Owners Manual / Installation Guide

Installation Instructions for Incline Sink
The Incline sink uses a unique slot drain that does not have any exposed drain components on top. The
incline sink is available as an undermount sink or as an MTI counter-sink. The incline sink is not for top
mount, or self rimming applications. This feature requires a special drain trough assembly ** below to
catch water and needs to be installed per the following instructions.
Undermount installation:
1) Turn sink over to clean flat area of sink where trough will attach. Concentrate on outer edges
as this is where the silicone will be adhering. Use Ethyl Propyl alcohol to clean surfaces of
both the sink, and the drain trough.