Specification Sheet
MTI BASICS® Tubs
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
Rev. 12 10 2021
©2021 by MTI Baths, Inc. Modification Rights Reserved.
• Before discarding tub crate, check for accessories that may be packaged inside.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
Package
Package Content
Soaker Soaking bath - No jets. Includes textured bottom.
Air Bath
12 air jets, heated air blower, pre-leveled foam base and
textured bottom. Pre-leveled foam base increases overall
tub height 2”-3”
Whirlpool 6 point-massage jets, 1-bhp pump and textured bottom
Options
Must be ordered at time of purchase.
Standard White (no charge)
Color Upgrade: Biscuit (MTISCOLOR)
Quick Ship / Priority
Soaker & Whirlpool (QSHIPMTIS)
Airbath (QSHIPMTISA)
Inline Heater
For Whirlpool (HTRMTIS) uses existing pump
For Soaker & Air Bath (MBHTI SOAK)
heater with recirculating pump
Accessories
.
Lift and Turn Drain & Overflow
Chrome (MBWOC), White (MBWOW),
Brushed Nickel (MBWOBN)
Pillows
Soft Pillow
White (MBPSW) Black (MBPSB)
Roll-Up Pilow
Light Aqua (MBPRUC) Black (MBRUB)
Installation Options
. Must be ordered at time of purchase.
Pre-Leveled Foam Base
5’ Tubs (MBPLFOAM)
5.5’ & 6’ Tubs (MBPLFOAM2)
All airbaths include a pre-leveled foam base.
˚
Before ordering or installing, consider access to equipment.
˚
Always measure tub on-site before building tub deck.
˚
Use proper bedding compound to fully level and support the tub.
˚
Tubs equipped with an air system or factory installed pre-leveled foam base are
designed to install directly onto a flat level subfloor.
˚
Tub height is increasd up to 3” when equipped with factory-installed foam base.
˚
Location of all therapy components is predetermined and cannot be changed.
˚
Options listed cannot be combined with Designer Collection options.
Important Ordering and Installation Information
Hydrotherapy Package Components Included
GFCI / 110V
Soaker with Optional
Inline Heater
½-bhp pump, inline
heater
1-15 amp
Whirlpool or Air Bath 1-bhp pump
1-15 amp
Whirlpool with Optional
Inline Heater
1-bhp pump, inline
heater
1-20 amp
Air Bath with Optional
Inline Heater
heated blower, ½-bhp
pump, inline heater
2-15 amp
CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7
Part #
MBSODI6036
MBAODI6036
MBWODI6036
48½"
41"
18¾"
14 ¾"
17 "
18 "
27¼"
26"
17
¾"
4"
35½"
59½"
8½"
CSA # MTIS-ODI6036
Shown with Whirlpool Package
MBODI6036
59.5” x 35.5” x 18.75”
Installation: Drop-In
Material: Acrylic
Plumbed Weight: 99 lbs / 45 kg
Soaker Weight: 75 lbs / 34 kg
Average Fill: 41 gal to above jet level
Maximum Fill: 62 gal to overflow
Compliance
Label
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-
1995
CSA Certified C/US