Specification Sheet

1 of 3
Designer Collection Tubs
CSA # MTDS-
See the Installation & Operation Manual for more details.
MTI’s Customer Service Monday-Friday 8am-6pm EST
800-783-8827 or [e-mail]
Hydrotherapy Package Components Included GFCI / 110V
Standard Whirlpool 2-bhp pump 1-15 amp
Stream Bath
½-bhp
1-15 amp
Microbubbles Microbubbles pump 1-15 amp
Ultra Whirlpool 3-bhp pump, inline heater, ozone 2-15 amp
Air Massage heated blower 1-15 amp
Air Massage Elite heated blower, chromatherapy 1-15 amp
Air Massage w/ Stream Bath
½-bhp pump, heated blower
1-15 amp
Air Massage Elite w/ Stream Bath
½-bhp pump, heated blower, chromatherapy
1-15 amp
Electrical requirements may change with the addition of optional therapy components.
See specific option details or installation information.
CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7
Hydrotherapy Package Components Included GFCI / 110V
Microbubbles with Air Microbubbles pump, heated blower 1-20 amp
Microbubbles with Air Elite Microbubbles pump, heated blower, chromatherapy 2-15 amp
Air with Whirlpool 2-bhp pump, heated blower 2-15 amp
Air with Ultra Whirlpool 3-bhp pump, inline heater, heated blower, ozone 2-20 amp
Air Elite with Whirlpool 2-bhp pump, heated blower, chromatherapy 2-15 amp
Air Elite with Ultra
Whirlpool
3-bhp pump, inline heater, heated blower, chromatherapy ,
ozone
2-20 amp
IMPORTANT ORDERING & INSTALLATION INFORMATION
ELECTRICAL COMPONENTS & SPECIFICATIONS
©2021 by MTI Baths, Inc. Modification Rights Reserved
Effective 02 28 2021
• Before ordering or installing, please consider future access to equipment.
• Add proper bedding compound to fully level and support bottom of tub.
• When equipped with an air bath package, pre-leveled foam base or frame system, overall
tub height is increased by approx. 2-3” and is designed to install on a flat, level subfloor.
• Radiance placed on airbath floor will affect placement of air jets.
• System components may extend beyond the perimeter of deck.
• Please measure tub on-site before building tub decking.
• Advise MTI when planning to use a glass enclosure. Relocation of controls may be necessary.
• Suction and control locations may vary.
• Before discarding tub crate, check for accessories that may be packaged inside.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
Effective 03 01 2021
Features integral armrests.
Shown with optional textured bottom.
59¼"
31¼"
26"
19 ¾"
21½"
2½"
52"
41½"
14 ½"
2
1
7½"
2½"
15
5
/8"
173⁄8"
191⁄8"
183⁄8"
126°
IMPORTANT:
Air baths and tubs with
a pre-leveled foam base
or frame system add 2-3"
to overall tub height.
Numbered areas on tub deck represent possible locations
to install cleaning systems, faucets and other fixtures.
Shown with Air Massage and Ultra Whirlpool Package.
GENERAL SPECIFICATIONS
Material - Acrylic
Installation - Drop-in (cannot be undermounted)
Plumbed Weight - 125 lbs / 57 kg
Soaker Weight - 100 lbs / 45 kg
Average Fill - 34 gal to above jet level
Maximum Fill - 52 gal to overflow
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
Compliance Label
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-1995
CSA Certified C/US
Wyndham 2
 # 6
59.25" x 31.25" x 19.125"
6