Specification Sheet
Eective 012618 ©2018 by MTI Baths, Inc. Modification Rights Reserved.
5 of 5
DUAL MOUNTING DECKS FEATURES
• In order to accommodate the installation of
various fixtures and controls, Caribe may be
ordered with dual mounting decks.
• These 12" x 6½" decks are positioned in the
center of the water canal.
• One is located at the front of the tub, the second
at the rear.
• Two decks are necessary when space for fixtures
and multiple controls is required.
• One deck would provide a surface for the spout
and hot and cold mixing valves.
• The second deck would house the air bath
and / or whirlpool controls.
• A deck is required for mounting the whirlpool
controls.
• Decks do not interrupt the operation of the
overflow function.
• If less mounting space is required, see reverse
side for Caribe with Single Deck.
• Must be specified at the time of ordering.
22"
61¼"
46½"
78¼"
46¾"
26"
Water
Canal
Drain
6½"
12 "
Deck
20¼"
18½"
21¼"
12 "
14 "
Deck
6½"
4"
29½"
13 ½"
8¾"
2¼"
2¼"
107°
Caribe shown above with dual mounting decks.
Solid raised deck provides a mounting area for fixtures and controls,
such as Fill-Flush
®
or Breda backflow prevention valve.
Compliance Label
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-1995
CSA Certified C/US
Before ordering
or installing,
please consider
future access
to equipment.
IMPORTANT: If you are planning to use a glass enclosure, MTI must be advised when ordering for possible relocation of controls.
Caribe
(Continued) with Optional Dual Deck
Designer Collection Tubs
Model # 89





