Specification Sheet
Designer Collection Tubs
See the Installation & Operation Manual for more details.
MTI’s Customer Service Monday-Friday 8am-6pm EST
800-783-8827 or service@mtibaths.com
Hydrotherapy Package Components Included GFCI / 110V
Standard Whirlpool 2-bhp pump 1-15 amp
Microbubbles Microbubbles pump 1-15 amp
Ultra Whirlpool 3-bhp pump, inline heater, ozone 2-20 amp
Air Massage heated blower 1-15 amp
Air Massage Elite heated blower, chromatherapy 1-15 amp
Electrical requirements may change with the addition of optional therapy components.
See specific option details or installation information.
CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7
Hydrotherapy Package Components Included GFCI / 110V
Microbubbles with Air Microbubbles pump, heated blower 1-20 amp
Microbubbles with Air Elite Microbubbles pump, heated blower, chromatherapy 2-15 amp
Air with Whirlpool 2-bhp pump, heated blower 2-15 amp
Air with Ultra Whirlpool 3-bhp pump, inline heater, heated blower, ozone 2-20 amp
Air Elite with Whirlpool 2-bhp pump, heated blower, chromatherapy 2-15 amp
Air Elite with Ultra
Whirlpool
3-bhp pump, inline heater, heated blower, chromatherapy
,
ozone
2-20 amp
IMPORTANT ORDERING & INSTALLATION INFORMATION
ELECTRICAL COMPONENTS & SPECIFICATIONS
Rev. 01 20 2022
• Before ordering or installing, please consider future access to equipment.
• Add proper bedding compound to fully level and support bottom of tub.
• When equipped with an air bath package, pre-leveled foam base or frame system, overall
tub height is increased by approx. 2-3” and is designed to install on a flat, level subfloor.
• Radiance placed on airbath floor will affect placement of air jets.
• System components may extend beyond the perimeter of deck.
• Please measure tub on-site before building tub decking.
• Advise MTI when planning to use a glass enclosure. Relocation of controls may be necessary.
• Suction and control locations may vary.
• Before discarding tub crate, check for accessories that may be packaged inside.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
©2022 by MTI Baths, Inc. Modification Rights Reserved
CSA # MTDS-
61¼"
46½"
78¼"
46¾"
2¼"
2¼"
29½" 26"
13 ½"
Water
Canal
Drain
1
2
22"
20¼"
18½"
21¼"
8¾" 6½"
4"
107°
61¼"
46½"
78¼"
46¾"
2¼"
2¼"
29½" 26"
13 ½"
Water
Canal
Drain
1
2
22"
20¼"
18½"
21¼"
8¾" 6½"
4"
107°
Overflow tub featuring a water canal around the perimeter.
Compliance Label
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-1995
CSA Certified C/US
89
IMPORTANT:
Air baths and tubs
with a pre-leveled
foam base or frame
system add 2-3" to
overall tub height.
Dotted lines indicate a raised, level deck area which is optional for valves and required for whirlpool.
Air bath control must be mounted adjacent to the tub and is shipped loose when ordered without deck plugs.
Shown with Air Massage and Ultra Whirlpool Package.
1 of 5
Caribe
89
78.25" x 46.75" x 22"
DROP-IN or UNDERMOUNT
Not recommended as a tub / shower combination
103 gal to overflow
Acrylic CXL
TM
135 lbs / 61 kg soaker
180 lbs / 82 kg plumbed
Filling this tub to the maximum may require an
above average size or dedicated water heater.





