Specification Sheet

1 of 3
Designer Collection Tubs
See the Installation & Operation Manual for more details.
MTI’s Customer Service Monday-Friday 8am-6pm EST
800-783-8827 or [e-mail]
Hydrotherapy Package Components Included GFCI / 110V
Standard Whirlpool 2-bhp pump 1-15 amp
Microbubbles Microbubbles pump 1-15 amp
Air Massage heated blower 1-15 amp
Air Massage Elite heated blower, chromatherapy 1-15 amp
Electrical requirements may change with the addition of optional therapy components.
See specific option details or installation information.
CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7
Hydrotherapy Package Components Included GFCI / 110V
Microbubbles with Air Microbubbles pump, heated blower 1-20 amp
Microbubbles with Air Elite Microbubbles pump, heated blower, chromatherapy 2-15 amp
Air with Whirlpool 2-bhp pump, heated blower 2-15 amp
Air Elite with Whirlpool 2-bhp pump, heated blower, chromatherapy 2-15 amp
IMPORTANT ORDERING & INSTALLATION INFORMATION
ELECTRICAL COMPONENTS & SPECIFICATIONS
©2022 by MTI Baths, Inc. Modification Rights Reserved
Rev. 01 19 2022
• Before ordering or installing, please consider future access to equipment.
• Add proper bedding compound to fully level and support bottom of tub.
• When equipped with an air bath package, pre-leveled foam base or frame system, overall
tub height is increased by approx. 2-3” and is designed to install on a flat, level subfloor.
• Radiance placed on airbath floor will affect placement of air jets.
• System components may extend beyond the perimeter of deck.
• Please measure tub on-site before building tub decking.
• Advise MTI when planning to use a glass enclosure. Relocation of controls may be necessary.
• Suction and control locations may vary.
• Before discarding tub crate, check for accessories that may be packaged inside.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
CSA # MTDS-
CSA # MTDS-
IMPORTANT:
Air baths and tubs with
a pre-leveled foam base
or frame system add 2-3"
to overall tub height.
Compliance Label
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-1995
CSA Certified C/US
53½"
45½"
16 "
59½"
30½"
42"
3"
4"
34"
29½"
14 "
7¾"
16 "
4"
3"
19¾"
17"
19"
119°
92°
Available with left- or right-hand drain.
When ordered with Install Ease frame & skirt package, wall-mount valves are required.
Shown with Air Massage and Standard Whirlpool Package.
43
43DM
Mirage
 43
59.5" x 30.5" / 42" x 19.75"
DROP-IN (cannot be undermounted)
Not recommended as a tub / shower combination
85 gal to overflow
Acrylic CXL
TM
100 lbs / 45 kg soaker
150 lbs / 68 plumbed
Filling this tub to the maximum may require an
above average size or dedicated water heater.