Specification Sheet

ELECTRICAL COMPONENTS & SPECIFICATIONS
Required Electrical Service - 110 Volt
Hydrotherapy Package Components Included GFCI
Air Massage heated blower 1-15 amp
Air Massage Elite heated blower, chromatherapy 1-15 amp
For electrical requirements of tub options, see specic options specs
CSA Certified C/US; ANSI Z124.1 for plastic tubs and ANSI 112.19.7 for whirlpool
components.
See the "Designer Collection Tubs Installation & Operation Manual"
included with tub delivery or go to:
mtibaths.com/support/installation
for all the information necessary to install and operate the tub.
MTI's Customer Service Department is available
Monday-Friday 8am-6pm EST at 800-783-8827 or
[e-mail]
to answer any questions pertaining to ordering or installation.
Eective 080119 ©2019 by MTI Baths, Inc. Modification Rights Reserved.
CSA # MTDS-241
GENERAL SPECIFICATIONS:
Material - Acrylic
Installation - Freestanding
Soaker Weight - 125 lbs / 57 kg
Maximum Fill - 80 gal to overflow
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
Loretta
66.5" x 36" x 27"
Designer Collection Tubs
Model # 241
66½"
64"
30"
36"
12¼"
5"
33¾"
27" 19" 16¾"
23¼"
43¾"
Footprint = 53" x 30½"
115°
The Loretta features a flat deck surface on the drain side for mounting faucetry.
The drain and overflow assembly is concealed between the walls of the tub, eliminating the need for an exposed drain kit.
Shown with Air Massage Package.
IMPORTANT ORDERING & INSTALLATION INFORMATION:
• This freestanding tub comes equipped with a magnetic access panel on the
drain side (shown to the right) to facilitate installation of faucet, drain, and
overow.
• Before ordering or installing, please consider future access to
equipment.
• When ordering an air bath, the air blower must be remote mounted.
• Radiance placed on floor locations will affect placement of air jets.
• Virtual Spout option can only be installed on the drain side of tub.
• Specifications and configurations are subject to change without notice.
• Measurements are +1/2" and are subject to change without notice.
• Measurements herein supersede all others published prior to publication date shown
below.