Owners Manual / Installation Guide

Installation Instructions
Installation and Operational Manual
°
Boutique Collection
°
Solid Stone® Tubs
mtibaths.com / 2
Installation Instructions
WARRANTY CARDS & CSA LABELS:
Read all instructions before installing tub. MTI recommends using a professional installer for this product.
Installer/product owner is responsible for complying with all state and local codes. Handle this tub with extreme
caution. Dropping this product, even from several inches, may cause cracking and permanent damage. Rubber
gripped gloves may make it easier to handle the ESS bath.
This tub is made of resin and natural minerals and may have minor variations in color and surface texture
throughout the tub. This is normal and part of the unique, handcrafted beauty for products made from natural
minerals such as MTI’s Engineered Solid Stone. Please see ‘Care & Cleaning Instructions’ on page 11.
Inspect tub thoroughly.
˚
Damage from shipping or delivery must be reported to carrier immediately. Do not install damaged tub. MTI is
not responsible for damage occuring during transit.
˚
Factory defect must be reported to factory before tub is installed. Defects or damage claimed after installation
will be excluded from warranty.
˚
Ensure location is structurally sound, flat & level. See individual specification sheets for weights
and water capacity.
Please note: Blemishes, air holes or casting marks on the underside of the bath are not considered defects and
do not aect the performance or quality of the bath.
Always protect the tub from construction damage by using a protective cover. Damage, including chips and
scratches incurred at the jobsite are excluded from warranty, but may be repaired by a qualified technician at the
owner’s expense. Do not stand in the tub or store materials in the tub during construction. Tubs are intended for
indoor use. Tubs are warrantied for indoor installation in a climate controlled environment only.
Never leave a full or filling bath unattended.
BEFORE INSTALLING:
SAMPLE
IMPORTANT: Locate and note
your serial number on the
cover of this manual for any
future service needs.