Specification Sheet

Eective 010119 ©2019 by MTI Baths, Inc. Modification Rights Reserved.
ELECTRICAL COMPONENTS & SPECIFICATIONS
Required Electrical Service - 110 Volt
Hydrotherapy Package Components Included GFCI
Air Massage heated blower 1-15 amp
Air Massage Elite heated blower, chromatherapy 1-15 amp
For electrical requirements of tub options, see specific options specs
CSA Certified C/US; ANSI Z124.1 for plastic tubs and ANSI 112.19.7 for whirlpool
components.
See the "Designer Collection Tubs Installation & Operation Manual"
included with tub delivery or go to:
mtibaths.com/support/installation
for all the information necessary to install and operate the tub.
MTI's Customer Service Department is available
Monday-Friday 8am-6pm EST at 800-783-8827 or
[e-mail]
to answer any questions pertaining to ordering or installation.
CSA # MTDS-216
IMPORTANT ORDERING & INSTALLATION INFORMATION:
• Tub features an integrated, non-removable pedestal base.
• Before ordering or installing, please consider future access to equip-
ment.
• Cable drain kit is included for on-site installation.
• When ordering an air bath, the air blower must be remote mounted.
• This freestanding tub comes equipped with an access panel on the drain
side (shown to the right) for installation of waste and overflow. If the tub will be view
-
able form all angles, MTI will upon request eliminate the access panel. Please note,
installation will be slightly more difficult.
• Radiance placed on floor locations will affect placement of air jets.
• If tub is equipped with Chromatherapy or Radiance, the control box must be remote
mounted.
• Virtual Spout option can only be installed on the drain side of tub.
• Specifications and configurations are subject to change without notice.
• Measurements are +1/2” and are subject to change without notice.
• Measurements herein supersede all others published prior to publication date
shown below.
GENERAL SPECIFICATIONS:
Material - Acrylic
Installation - Freestanding
Soaker Weight - 121 lbs / 55 kg
Maximum Fill - 77 gal to overflow
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
Laney 4
72" x 33.75" x 23.5"
Designer Collection Tubs
Model # 216
23"
114°
17"
20½"
23½"
27¾"
9"
33¾"
72"
36"
3"
62½"
49½"
3"
Requires use of a wall-mounted or freestanding tub filler. The drain and overflow assembly
is concealed between the walls of the tub, eliminating the need for an exposed drain kit.
Shown with Air Massage Package.