Specification Sheet

Eective 012618 ©2018 by MTI Baths, Inc. Modification Rights Reserved.
5 of 5
DUAL MOUNTING DECKS FEATURES
In order to accommodate the installation of
various fixtures and controls, Caribe may be
ordered with dual mounting decks.
These 12" x 6½" decks are positioned in the
center of the water canal.
One is located at the front of the tub, the second
at the rear.
Two decks are necessary when space for fixtures
and multiple controls is required.
One deck would provide a surface for the spout
and hot and cold mixing valves.
The second deck would house the air bath
and / or whirlpool controls.
A deck is required for mounting the whirlpool
controls.
Decks do not interrupt the operation of the
overflow function.
If less mounting space is required, see reverse
side for Caribe with Single Deck.
Must be specified at the time of ordering.
22"
61¼"
46½"
78¼"
46¾"
26"
Water
Canal
Drain
"
12 "
Deck
20¼"
18½"
21¼"
12 "
14 "
Deck
"
4"
29½"
13 ½"
8¾"
2¼"
2¼"
107°
Caribe shown above with dual mounting decks.
Solid raised deck provides a mounting area for fixtures and controls,
such as Fill-Flush
®
or Breda backflow prevention valve.
Compliance Label
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-1995
CSA Certified C/US
Before ordering
or installing,
please consider
future access
to equipment.
IMPORTANT: If you are planning to use a glass enclosure, MTI must be advised when ordering for possible relocation of controls.
Caribe
(Continued) with Optional Dual Deck
Designer Collection Tubs
Model # 89