Specification Sheet
Designer Collection Tubs
1 of 3
See the Installation & Operation Manual for more details.
MTI’s Customer Service Monday-Friday 8am-6pm EST
800-783-8827 or service@mtibaths.com
Hydrotherapy Package Components Included GFCI / 110V
Standard Whirlpool 2-bhp pump 1-15 amp
Stream Bath
½-bhp, ozone
1-20 amp
Microbubbles Microbubbles pump 1-15 amp
Ultra Whirlpool 2-bhp pump x 2, inline heater, ozone 2-20 amp
Air Massage heated blower 1-15 amp
Air Massage Elite heated blower, chromatherapy 1-15 amp
Air Massage w/ Stream Bath
½-bhp pump, heated blower, ozone
1-20 amp
Air Massage Elite w/ Stream Bath
½-bhp pump, heated blower, chromatherapy, ozone
1-20 amp
Electrical requirements may change with the addition of optional therapy components.
See specific option details or installation information.
CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7
Hydrotherapy Package Components Included GFCI / 110V
Microbubbles with Air Microbubbles pump, heated blower 1-20 amp
Microbubbles with Air Elite Microbubbles pump, heated blower, chromatherapy 2-15 amp
Air with Whirlpool 2-bhp pump, heated blower 2-15 amp
Air with Ultra Whirlpool 2-bhp pump x 2, inline heater, heated blower, ozone 2-20 amp
Air Elite with Whirlpool 2-bhp pump, heated blower, chromatherapy 2-15 amp
Air Elite with Ultra
Whirlpool
2-bhp pump
x 2
, inline heater, heated blower,
chromatherapy
, ozone
2-20 amp
IMPORTANT ORDERING & INSTALLATION INFORMATION
ELECTRICAL COMPONENTS & SPECIFICATIONS
Rev. 01 20 2022
• Before ordering or installing, please consider future access to equipment.
• When equipped with any hydrotherapy package or select options such as Radiance®
or HTI Soak, front panel is removable for access. Some hydrotherapy components
may require end-access. Contact MTI for more information before ordering.
• Must specify left- or right-hand drain when ordering.
• Use proper bedding compound to fully level and support the tub.
• Tubs equipped with an air system or factory installed pre-leveled foam base are
designed to install directly onto a flat level subfloor.
• Radiance placed on airbath floor will affect placement of air jets.
• System components may extend beyond the perimeter of deck.
• Advise MTI when planning to use a glass enclosure. Relocation of controls may be
necessary.
• Suction and control locations may vary.
• Before discarding tub crate, check for accessories that may be packaged inside.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
©2022 by MTI Baths, Inc. Modification Rights Reserved
CSA # MTDS-
CSA # MTDS-
59⁄"
19"
51"
16⁄"
44"
23"
7¼"
16"
59⁄"
32"
26⁄"
2⁄"
2⁄"
1
2
3 4
3⁄"
8"
24"
33⁄"
1⁄"
109°
Integral Armrest Height
Depth with Skirt
Footprint Depth
Numbered areas on tub deck represent possible locations
to install cleaning systems, faucets and other fixtures.
Shown with Air Massage and Ultra Whirlpool Package.
Compliance Label
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-1995
CSA Certified C/US
Wyndham 5 features integral skirting,
tile flange and armrests.
80
80DM
IMPORTANT:
Air baths and tubs
with a pre-leveled
foam base or frame
system add 2-3" to
overall tub height.
Wyndham 5
80
59.75" x 32" x 23"
ALCOVE
51 gal to overflow
Acrylic CXL
TM
DoloMatte
TM
105 lbs / 48 kg
<
>
118 lbs / 54 kg
129 lbs / 59 kg
<
>
145 lbs / 66 kg
Filling this tub to the maximum may require an
above average size or dedicated water heater.



