Specification Sheet
Eective 012618 ©2018 by MTI Baths, Inc. Modification Rights Reserved.
See the "Designer Collection Tubs Installation & Operation Manual" included with tub delivery or go to mtibaths.
com/support/installation_operation/manuals for all the information necessary to install and operate the tub.
MTI's Customer Service Department is available Monday-Friday 8am-6pm EST at
800-783-8827 or customerservice@mtibaths.com to answer any
questions pertaining to ordering or installation.
ELECTRICAL COMPONENTS & SPECIFICATIONS
Required Electrical Service - 110 Volt
Hydrotherapy Package Components Included GFCI
Standard Whirlpool 2-bhp pump 1-15 amp
Ultra Whirlpool 2 2-bhp pumps, inline heater 2-20 amp
Air Massage heated blower 1-15 amp
Air Massage Elite heated blower, chromatherapy 1-15 amp
Air Massage with
Standard Whirlpool
2-bhp pump, heated blower 2-15 amp
Air Massage with Ultra
Whirlpool
2 2-bhp pumps, inline heater,
heated blower
2-20 amp
Air Massage Elite with
Standard Whirlpool
2-bhp pump, heated blower,
chromatherapy
2-15 amp
Air Massage Elite with
Ultra Whirlpool
2 2-bhp pumps, inline heater,
heated blower, chromatherapy
2-20 amp
For electrical requirements of tub options, see specific options specs
CSA Certified C/US; ANSI Z124.1 for plastic tubs and ANSI 112.19.7 for whirlpool
components.
1 of 3
CSA # MTI-151
50½"
43"
15 "
17½"
3 4
1
2
24½"
22"
32"
3¾"
8"
60"
3
½
"
16
"
120°
103°
20"
205⁄8"
Features integral skirting and tile flange.
Numbered areas on tub deck represent possible locations to install cleaning systems, faucets and other fixtures.
Shown with Air Massage and Ultra Whirlpool Package.
Designer Collection Tubs
Model # 151
Cameron 1
60" x 32" x 20.625"
Compliance Label
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-1995
CSA Certified C/US
GENERAL SPECIFICATIONS:
Material - Acrylic
Installation - Alcove
Plumbed Weight - 130 lbs / 59 kg
Soaker Weight - 105 lbs / 48 kg
Average Fill - 30 gal to above jet level
Maximum Fill - 57 gal to overflow
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
IMPORTANT ORDERING & INSTALLATION INFORMATION:
• Before ordering or installing, please consider future access to equipment.
• Cameron includes integral front skirting, tile flange on 3 sides and a pre-leveled foam
base to facilitate the installation process.
• Tub is available with a left- or right-hand drain location. Must specify on order.
• Overall standard tub height is 20.625", but can be reduced by as low as 20" ONLY when
ordered as a soaker. Must specify on order.
• Skirting is non-removable and provides no access. Must have end access for servicing of
equipment.
• If you plan to use a glass enclosure, MTI must be advised when ordering for possible
relocation of systems controls.
• Suction and control locations may vary.
• Specifications and configurations are subject to change without notice.
• Measurements are +1/2" and are subject to change without notice.
• Measurements herein supersede all others published prior to publication date shown
below.



