Specification Sheet

See the "Designer Collection Tubs Installation & Operation Manual" included
with tub delivery or go to mtibaths.com/support/installation_operation/
manuals for all the information necessary to install and operate the tub.
MTI's Customer Service Department is available Monday-Friday 8am-6pm EST
at 800-783-8827 or [e-mail] to answer any questions
pertaining to ordering or installation.
Effective 020118 ©2018 by MTI Baths, Inc. Modification Rights Reserved.
ELECTRICAL COMPONENTS & SPECIFICATIONS
Required Electrical Service - 110 Volt
Hydrotherapy Package Components Included GFCI
Air Massage heated blower 1-15 amp
Air Massage Elite heated blower, chromatherapy 1-15 amp
For electrical requirements of tub options, see page C-2.
CSA Certified C/US; ANSI Z124.1 for plastic tubs and ANSI 112.19.7 for whirlpool components.
CSA # MTDS-67
GENERAL SPECIFICATIONS:
Material - Acrylic
Installation - Freestanding
Not recommended as a tub / shower combination.
Soaker Weight - 121 lbs / 55 kg
Maximum Fill - 101 gal to overflow
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
Requires use of a wall-mounted or freestanding tub filler. The drain and overflow assembly
is concealed between the walls of the tub, eliminating the need for an exposed drain kit.
Shown with Air Massage Package.
Designer Collection Tubs
Model # 67
48"
58"
25½"
8"
4"
71½"
41¾"
35¾ "
18 "
45½"
221⁄8"
115°
29½"
33½"
Optional Integral Armrests
2¾"
8"
New Yorker 3
71.5" x 41.75" x 25.5"
IMPORTANT ORDERING & INSTALLATION INFORMATION:
• Before ordering or installing, please consider future access to equipment.
• When ordering an air bath, the air blower must be remote mounted.
• If tub is equipped with Chromatherapy, the control box must be remote mounted.
• Specifications and configurations are subject to change
without notice.
• Measurements are +1/2" and are subject to change without notice.
• Measurements herein supersede all others published prior to publication date
shown below.
• This freestanding tub comes equipped with an access
panel on the drain side (shown to the right) for installation
of waste and overflow. If the tub will be viewable from all
angles, MTI will upon request eliminate the access panel
.
Please note, installation will be slightly more difficult.
B-99