DESIGNER COLLECTION ® F r e e s t a n d i n g a n d S c u l p t e d F i n i s h Tu b s O P E R AT I O N & C A R E MANUAL Effective June 1, 2013
OPERATING INSTRUCTIONS - KEYPAD & TUB CONTROL FUNCTIONS FOR AIR BATHS Keypads and functions will vary depending on specific model and/or options purchased. Use the photos on the following pages to locate your keypad and simply follow the step by step instructions. #1 STANDARD AIR SYSTEM FUNCTIONS ON/OFF: 1st Press: The blower starts. LED light on. 2nd Press: The blower stops. LED light off. BLOWER SPEED INCREASE Press & hold to increase the blower speed. Release pressure at the desired speed.
#4 AIR SYSTEM WITH LED LIGHT FUNCTIONS ON/OFF FOR AIR SYSTEM 1st Press: The blower turns on at 30% power. Use the up and down arrows to increase or decrease the speed. Please note: 20% is the minimum. If the lights for the up & down arrows go off, they can be reactivated by gently pressing the on/off button 2nd Press: The blower turns off. PULSATION MODE 1st Press: Standard wave. Speed will vary gradually from minimum to maximum. 2nd Press: Standard pulse.
# 4 AIR SYSTEM WITH LED LIGHT AND RADIANCE R4 FUNCTIONS ON/OFF FOR RADIANCE SYSTEM:1st Press: Turns on both heated zones. Light on keypad will be on. 2nd Press: Turns off Radiance system. Light will be off. ON/OFF FOR AIR SYSTEM 1st Press: The blower turns on at 30% power. Use the up and down arrows to increase or decrease the speed. Please note: 20% is the minimum. If the lights for the up & down arrows go off, they can be reactivated by gently pressing the on/off button 2nd Press: The blower turns off.
INDEPENDENT CHROMATHERAPY SYSTEM FUNCTIONS ON/OFF BUTTON: 1st Press: White light. LED light on (White is only available when the system is initially turned on). 2nd Press: Light off. LED light off. Press the on/off button - Light must be on for any mode to function. MODE BUTTON FUNCTIONS: 1st Press: Aqua-Blue-Green Cycle. - First cycle 1.5 seconds between color changes; then slows to 6 seconds between color changes.
CLEANING INSTRUCTIONS FOR THE ACRYLIC SHELL The cross-linked cast acrylic surface of all MTI air baths and soaking baths is among the glossiest, highest quality surfaces available. Its hard, non-porous surface prevents dirt from accumulating and resists stains better than other materials. With normal use, cast acrylic will retain its beauty with only a minimal amount of care.
