Installation Sheet

14
INDEPENDENT CHROMATHERAPY SYSTEM
FUNCTIONS
ON/OFF BUTTON:
1st Press: White light. LED light on
(White is only available when the system is initially turned on).
2nd Press: Light off. LED light off.
Press the on/off button - Light must be on for any mode to function.
MODE BUTTON FUNCTIONS:
1st Press: Aqua-Blue-Green Cycle. - First cycle 1.5 seconds between
color changes; then slows to 6 seconds between color changes.
2nd Press: Rainbow Cycle - Colors change from Aqua-Blue-Magenta-Red-Orange-Yellow-Green. First
cycle 1.5 seconds between color changes; then slows to 6 seconds between color changes.
3rd Press: Pressing the Mode button a third time will stop the system on the color displayed.To
change the color, use the up & down buttons to go through each color change in small increments.
(Alternatively, you could turn the light off and start over.)
UP ARROW FUNCTIONS:
To Change the Light Color - Pressing the up arrow will allow the lights to change through the basic
colors: Aqua, Blue, Magenta, Red, Orange, Yellow and Green.
When in the Rainbow Cycle - Press & hold to increase the cycle speed. Release pressure at the desired speed.
When in the Aqua-Blue-Green Cycle - Press & hold to increase the cycle speed. Release
pressure at the desired speed.
DOWN ARROW FUNCTIONS:
To Change the Light Color - Pressing the up arrow will allow the lights to change through the
basic colors: Aqua, Blue, Magenta, Red, Orange, Yellow and Green.
When in the Rainbow Cycle - Press & hold to decrease the cycle speed. Release pressure at the desired speed.
When in the Aqua-Blue-Green Cycle - Press & hold to decrease the cycle speed. Release
pressure at the desired speed.