Installation Sheet

Installation and Operational Manual
°
Designer Collection
°
Freestanding Tubs
mtibaths.com / 16
Care and Cleaning Instructions — DoloMatte
TM
MTI Designer DoloMatte is among the most renewable, high-quality surfaces available. Its hard, non-porous
surface resists stains. With normal use DoloMatte will retain its beauty with only a minimal amount of care. To
maintain its elegant look, follow these simple steps:
• MTI recommends cleaning with a soft, damp cloth and any mild dish soap and water. Fingerprints may be
removed with denatured alcohol applied to a soft cloth.
• Use common household, non-abrasive cleaners for most cleaning jobs. Use cleaners labeled specifically for
use on plastic.* Follow manufacturer’s directions and precautions. Rinse well and dry with a soft, clean cloth.
• Never use any type of “scrubbing bubbles” or aerosol spray cleaners on your product.* Do not use harsh
chemicals such as hydrochloric acid, sodium hydroxide, paint thinner, chloride solvents, or other solvents
with strong acid or base. Also avoid any cleaners that include lime removal agents such as CLR or Lime-
Away.
• For more stubborn stains, a mild abrasive cleaner such as Soft Scrub, Bon Ami or Barkeeper's Friend may be
used. A gray or red Scotch Brite pad may be used.
• Do not allow nail polish, nail polish remover, hair dye, Wintergreen oil, dry cleaning solution, lacquer thinners,
gasoline, pine oil, etc. to come in contact with the DoloMatte surface.
• Avoid using razor blades or other sharp objects that might scratch the surface.
• Small scratches may be removed by sanding with 600 grit wet/dry paper followed by cleaning with a mildly
abrasive cleaner such those noted above.
MTI strongly recommends contacting a surface repair professional for deep scratches or chips.
* Be sure to check the product label. Some products, although not containing abrasives,
WILL damage the product over time.