Instructions

Designer Collection Tubs
1 of 3
Rev. 07 21 2022
• Options and accessories may be packaged inside the tub crate. Always check
packaging before discarding.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
©2022 by MTI Baths, Inc. Modification Rights Reserved
CSA # MTDS-
CSA # MTDS-
Available as a freestanding model or finished on
1, 2 or 3 sides for various installation applications.
IMPORTANT ORDERING & INSTALLATION INFORMATION
• Before ordering or installing, please consider future access to equipment.
• Unless ordering Sculpted Finish on 4 sides, please include a diagram specifying which sides
will need to be finished, along with location of optional tile flange(s).
• Overflow is factory installed for provided toe tap drain.
• When ordering an air bath, the air blower must be remote mounted.
• Microbubbles system components must be installed on a non-Sculpted Finish side.
Components will extend beyond the perimeter of the tub. Call MTI for specific details
regarding the desired installation before placing the order.
• Radiance placed on floor locations will affect placement of air jets.
• Hydrotherapy equipment may ship loose for remote installation. See package content on
the following page for details.
• Faucet valves cannot be installed on this tub model.
• All tubs are compliant with ASTM C 1028-07 coecient of friction. DoloMatte meets ANSI
A137.1/A326.3 coecient of friction and AS HB198:2014 slip tests.
ELECTRICAL COMPONENTS & SPECIFICATIONS
Hydrotherapy Package Components Included GFCI/110V
Microbubbles Microbubbles pump 1-15 amp
Air Massage heated blower 1-15 amp
Microbubbles with Air Microbubbles pump, heated
blower
1-20 amp
Air Massage Elite heated blower, chromatherapy 1-15 amp
Microbubbles with
Air Elite
Microbubbles pump, heated
blower, chromatherapy
2-15 amp
Electrical requirements may change with the addition of optional therapy components.
See specific option details or installation information.
CSA Certified C/US; B45.5/IAPMO ANSI Z124.1 and ANSI 112.19.7
See the Installation & Operation Manual for more details.
MTI’s Customer Service: Monday-Friday 8am-6pm EST
800-783-8827 or [e-mail]
45"
393⁄8"
20¼"
15 ½"
17 "
22¾"
19½"
30"
3¾"
8 ¼ "
54"
3 ¼ "
15
"
120°
103°
107A
107D
The Sculpted Finish process does not allow enough
space for mounting fixtures on the tub deck.
Shown as Air Bath
Andrea® 17
with Sculpted Finish®
 107A
54" x 30" x 20.25"
FREESTANDING or ALCOVE
51 gal to overflow
Acrylic CXL
TM
DoloMatte
TM
140 lbs / 64 kg
<

>
158 lbs / 72 kg
Filling this tub to the maximum may require an
above average size or dedicated water heater.