Specifications

M.T.H. HO GG-1 Electric Engine
6
Digital Control
In standard analog AC or analog DC mode, your model still operates under
digital control. The PS 3E+ advance speed control system converts track voltage
into digital speed commands. Your model will run smoothly and consistently at
any speed regardless of load, hills, or curves. If you are a DCC/Motorola user,
you'll quickly learn to appreciate the precision of our speed control and linear
speed curve. DCS users will enjoy the added benefits of controlling speeds in
increments of 1 scale mile per hour displayed on DCS controllers or easily
changing acceleration and deceleration rates independently without any
discussion of bits or bytes. To be clear, DCS is NOT DCC.
Lights
As you read on, you'll notice there are no instructions for replacing light bulbs in
your diesel. That's because there aren't any. We use specially designed and
controlled LEDs to create realistic lighting effects that occur automatically.
Again, NO PROGRAMMING!! Just come to a stop and watch as the headlight
dims automatically in accordance with rule 17. Of course, as you pull away, the
headlight returns to it's fully bright, yet warm, glow. We even included a cab
light that automatically goes out when the engine begins to move and comes back
on when the engine stops.
More…
In analog DC operation, just flip the track polarity or direction switch at any
speed and watch your Engine gradually come to stop, turn on the appropriate
directional lighting, and smoothly accelerate back up to speed. No other HO
locomotive has features like these. There are so many more things to learn and
enjoy about M.T.H. HO Engines, we could write a book. But, that's no fun. So,
if you haven't already done so, flip to the Quick Start Guide and let's run your
new engine!!