Operation Manual

Operating Manual English

Engine emits smoke. Too much oil in engine. Switch off engine immediately.

Check engine oil level.

Engine defective. Switch off engine immediately. Arrange for

service agent to check the engine.

Excessive vibration. Damaged blade drive shaft or

defective cutting blade.

Switch off engine immediately.

Have defective parts replaced.

Cutting mechanism does

not discharge grass or cuts

unevenly.

Engine speed too low. Increase throttle.

Travelling speed too high. Set to a lower travelling speed.

Cutting blade is blunt. Arrange for service agent to sharpen or

replace blade.

Engine is running, cutter

deck is not mowing.

V-belt torn. Have the V-belt replaced in a repair shop.

Problem Possible cause(s) Remedy