Specifications

TM5-6115-585-34
NAVFAC P-8-262-12
TO-35C2-3-455-2
TM-05684C-34
Table 1-2. Repair and Replacement Standards (Cont)
Manufacturer Dimensions
and Tolerances
Maximum Allowable
Component
Minimum
Maximum
Wear Limit
FLYWHEEL:
Face runout, total
0.0053
Pilot bore eccentricity
0.0020
FLYWHEEL HOUSING:
Attaching face deviation
0.0113
Housing bore eccentricity
0.005
ROCKER ARM MECHANISM:
Tappet adjusting screw torque
4 ft-lbs
10 ft-lbs
CYLINDER HEAD:
Warpage (longitudinally)
0.001
0.0015
Warpage (laterally)
0.001
0.0015
(7) Oil Cooler.
Refer to Operator and
m. Engine Repair and Replacement Standards. Table
Organizational Maintenance Manual.
1-2 lists manufacturer’s sizes, tolerances, and maxi-
mum allowable wear and clearances.
1. Safety Devices.
n. Schematic Wiring Diagrams. Figure 1-1 shows
(1) High temperature switch. Refer to Operator
the schematic wiring diagram of the power plant.
and Organizational Maintenance Manual.
o. Torque Values.
(2) Low oil pressure switch. Refer to Operator
(1) Table 1-1 lists specific torque values.
and Organizational Maintenance Manual.
(2) All torque values are calculated for oil lubri-
(3) Fuel level switch (day tank). Refer to Oper-
cated threads. Increase this value by 10 percent when
ator
and Organizational Maintenance Manual.
threads are not Lubricated.
1-8