Specifications
Magna-Power Electronics • Programmable DC Power Supply18
MT Series VI: 100 kW to 2000 kW+
Overview
Magna-Power Electronics MT Series VI uses the same reli-
able current-fed power processing technology and controls
as the rest of the programmable DC power supply product
line, but with larger high-power modules: individual 100
kW, 150 kW and 250 kW power supplies. As an added
safety measure, all MT Series VI units include an input AC
breaker rated for full power. The independent IGBT-based
MT Series VI units are among the largest standard switch-
mode power supplies on the market, minimizing the number
of switching components when comparing to smaller module
sizes. Scaling in the multi-megawatts is accomplished using
the UID47 device, which provides master/slave control: one
power supply takes command over the remaining units, for
true system operation.
250 kW modules come standard with an embedded 12-pulse
harmonic neutralizer, ensuring low total harmonic distor-
tion (THD). Even higher quality AC waveforms are avail-
able with an external additional 500 kW 24-pulse or 1000
kW 48-pulse harmonic neutralizers, designed and manu-
factured exclusively for Magna-Power Electronics products
(Page 29).
All MT Series VI power supplies come standard with isolat-
ed 37-pin external I/O, RS232, Remote Interface Software,
IVI drivers for integration into a variety of programming
environment Three front panel types are available (Page 22)
for maximum application fl exibility. The A Version provides
front panel control and calibration, start and stop buttons,
and a digital display for voltage and current. The D Version
front panel adds a 10-key digital front panel entry, memory
sequencing, and modulation capabilities for non-linear out-
put profi le emulation.
Available Options
•
Harmonic Neutralizer
• High Isolation Output (+ISO)
• High Slew Rate Output (+HS)
• IEEE 488.2 GPIB Interface (+GPIB)
• LXI TCP/IP Ethernet Interface (+LXI)
• Photvoltaic Power Profi le Emulation (+PPPE)
• RS-485DSS Interface (External) (+RS485)
• UID47: Universal Interface Device (+UID)
• USB Edgeport Interface (External) (+USB)
MT Series VI 100 kW and 150 kW Module
MT Series VI 250 kW Module
Product Name: MT Series VI
Number of Models: 65
Power Levels: 100 kW to 2000 kW+
Voltage Range: Models from 0-16 Vdc to 0-4000 Vdc
Current Range: Models from 0-24 Adc to 0-24000 Adc
Enclosure Floor Standing Cabinet










