Single Phase Systems-North American PC125/PC420 Series Enclosure Power Distribution Units (ePDU™)
PC125-C Front RACK MOUNTED • 19” x 3.4” (2U) x 8.5”. • Approximate shipping weight: 19 lbs.
Optional Remote Control Panel RCP200-BLK-LT RCP100-BLK-LT Standard Remote Control Interface REMOTE START REQUIRES (2) CONDITIONS: 1. The “on/off/remote” switch must be in the “remote” position. 2. A maintained closure between pins 1 & 3 will turn the unit on. REMOTE POWER OFF REQUIRES (1) CONDITION: 1. Opening the maintained connection between pins 1 & 3 will turn off the switched outlets. REMOTE EPO REQUIRES (1) CONDITION: 1.
Environmental Operating Temperature is 0 to 50 C Storage Temperature is -40 to 70 C Altitude Maximum 10,000 ft. Relative Humidity is 95% Max Non-Condensing Rack Mounting Hole Specification Table 19.00” Y Z A HOLE SPECIFICATION TABLE A Y Z 3.5 .875 1.75 TVSS (Transient Voltage Surge Suppression) MOV SPECIFICATIONS Continuous AC Voltage 150VAC 270VAC 320VAC Continuous DC Voltage 200VDC 360VDC 420VDC Max.
Drawings are not shown to scale Dimensions are in inches 5 www.pulizzi.com • pulizzisales@eaton.com • 800-870-2248 • Fax: 605-334-4999 © 2008 Eaton Corporation. All Rights Reserved. All specifications are subject to change without notice.
