Technical data

Operating Manual FK 105

9. Lower the mower on to e.g. squared timber so that the strain relief clamp on the front side

of the deck is not stressed.

10. Unbolt the strain relief clamp from the cross member "D" on the front of the machine and

replace it with the supplied deck suspension "E". Re-adjust the tension distance according

to the original strain relief clamp.

11. Undo the fixing bolt of the engine V-belt pulley. Position the supplied V-belt pulley "F"

so that the pins on the spanner flats of the coupling nut act as drivers. Fix everything with

the whitworth bolt also supplied. Tightening torque 51-68 Nm.

12. Perform a test run and functional check - ensure that the engine always stops

automatically as soon as the operator leaves the driver's seat.

View from

front right