Technical data

Operating Manual FK 105

4. Open the black cable harness sheath from the wiring harness to the brake switch (between

step and frame) and expose the yellow/white cable.

5. Connect the free end of cable "A" to the yellow/white cable with a branch connector "B".

6. Press all the cables back into the cable harness sheath and fasten the cable "A" in parallel

with the cable harness using 3 cable ties.

7. Replace right-hand side panel and/or fuel tank (depending on design).

8. It is necessary to limit

the lift-up height of the

mower deck due to the

additional V-belt pulley

under the engine. An

M12x25 bolt with 2

large washers and a lock

nut are mounted on the

lever connecting link for this.

right

footboard