Technical data

Operating Manual FK 105

Mounting

Preparing the lawn tractor for mounting the front sweeper

For technical safety reasons, a cable bridge according to the instructions below must

be installed for the attachment of the sweeper. The installed cable bridge between

brake switch and seat safety switch ensures that the engine always automatically

switches off as soon as the operator leaves the driver's seat.

1. Open the engine cover and if necessary remove the right-hand side panel and / or the

fuel tank (depending on the design) in order to access the cable harness.

2. Open the black cable harness sheath

from the wiring harness to the ignition

switch (underneath the

fuel tank) and

expose the yellow cable.

Electrical accessories:

A = vehicle cable 1.5 mm²

B = branch connector, blue

C = cable tie

3. Connect cable "A" to the yellow cable with a branch connector "B"

Fuel tank

removed