Technical data

Operating Manual FK 105

Removal of the front sweeper

1. Switch off the engine of the tractor. The sweeper is raised.

Wait until all parts are at a standstill. Let the exhaust area cool down or

use suitable work gloves.

Remove the lifting tube and the extension tube of the swivel rod from the sweeper.

In order to pull out the locking elements "G" of the Fast-Attach-System and to fold on to

the sides, hold the front edge of the brush deck and lift this at the same time.

Lower the sweeper on to the ground. The machine is now jack-knifed (photo). The V-belt

is not tensioned.

2. Set the mower deck in a low position and remove the V-belt from the additional pulley.

Let it simply lie underneath.

The same as for attachment, hold the sweeper again with the knob "H" and the bracket

"J" and lift it upward to the front out of the Fast-Attach-System.

Storage / Not in use

When not in use, the sweeper should be placed

vertically saving space on the brackets "R".

In this way, the brushes are not stressed and do

not acquire any flat places.

ack-knifed