Technical data

Operating Manual FK 105
11
3. Now swivel the locking elements "G" so that they engage in the holes of the side plates.
Go in front of the sweeper, hold the front edge of the brush deck and lift this until the
locking elements audibly engage in the tractor bore holes of the Fast-Attach-System.
The sweeper is coupled and the V-belt to the tractor has been correctly tensioned by the
spring-mounted tensioner.
4. Push the lifting tube "M" onto the lever of the sweeper on the right-hand side. A tube
hinged pin is used for locking. On the left-hand side, the extension tube "O" must be put
on the swivel rod "P" and locked with a spring cotter "Q". The angled handle end of the
tube should face upwards.
G
V-belt
M
N
O
(
covered
)
Q
P