Technical data

65EN 10/2010 i-KI MTD / i-KIR MTD
U I A
LIST OF PARAMETERS
U I A
Description Menu Parameter no. UOM
Domestic hot water temperature set point for Legionella prevention Mn02 0211 °C
Legionella prevention cycle day MONDAY (0=no 1=yes) Mn02 0213
Legionella prevention cycle day TUESDAY (0=no 1=yes) Mn02 0214
Legionella prevention cycle day WEDNESDAY (0=no 1=yes) Mn02 0215
Legionella prevention cycle day THURSDAY (0=no 1=yes) Mn02 0216
Legionella prevention cycle day FRIDAY (0=no 1=yes) Mn02 0218
Legionella prevention cycle day SATURDAY (0=no 1=yes) Mn02 0219
Legionella prevention cycle day SUNDAY (0=no 1=yes) Mn02 0220
Legionella prevention cycle time Mn02 0221 h
Enable Legionella prevention function 0 = Not enabled 1 = Enabled Mn02 0222
Legionella prevention function with: 0 = heat pump only 1 = electric heater only 2 = heat pump + electric heater Mn02 0223
Maximum Legionella prevention function duration Mn02 0225 min.
Enable electric heater: 0 = Heater not enabled, 1 = Heater enabled Mn03 0300
Enable boiler: 0 = Boiler not enabled, 1 = Boiler enabled Mn03 0301
Activation for low outside air temperature: 0 = Function not enabled, 1 = Function enabled Mn03 0303
Outside air temperature to enable electric heater Mn03 0304 °C
Activation for low outside air temperature: 0 = Function not enabled, 1 = Function enabled Mn03 0306
Outside air temperature to enable boiler Mn03 0307 °C
Minimum outside air temperature for heat pump operation
(make sure the value shown in the table is set)
Mn03 0311 °C
Electric heater activation delay time
(allows the heat pump to reach steady operation and thus avoid activating the heater when not needed)
Mn06 0616 min.
Integration time to activate outlet electric heaters Mn06 0617 °C*sec
Boiler activation delay time
(allows the heat pump to reach steady operation and thus avoid activating the boiler when not needed)
Mn06 0618 min.
Integration time to activate boiler Mn06 0619 °C*sec
Enable manual heater operation Mn06 0620
Domestic hot water set point Mn00 0023
User password Mn00 0036
Relationship between plant and ambient: 0 = Unit work on ambient request, 1 = Unit work indipendent Mn01 011D
Installer password Mn01 011G
Enable compensation curve for LT3 in HEATING 0= Disabled (fixed set point operation) 1= Enabled Mn01 011R
Enable compensation curve for zone LT3: 0= Disabled, 1= Enabled Mn01 011T
Fixed water outlet temperature set point for LT3 in HEATING Mn01 011U °C
Zone LT3 compensation curve number Mn01 012A
Enable room temperature influence on LT3 0= Disabled 1= Enabled Mn01 012D
LT3 Room Authority Mn01 012E %
MINIMUM outlet set point limit for compensation curve in zone LT3 Mn01 012F °C
MAXIMUM outlet set point limit for compensation curve in zone LT3 Mn01 012G °C
Maximum outlet temperature set point limit in cooling mode (Tm1) Mn01 012H °C
Minimum outside temperature corresponding to max. outlet temperature (Te1) Mn01 012J °C
Minimum outlet set point limit in cooling mode (Tm2) Mn01 012L °C
Minimum outside temperature corresponding to min. outlet temperature (Te2) Mn01 012M °C
Activation of system pump operation at intervals: 0= system pump always on, 1=system pump operation at intervals Mn01 0143
System pump operating time in sniffing mode Mn01 0147
System pump off time between one sniffing cycle and the next Mn01 0148
Enable contact as: 0 =Reduced electricity rate, 1=Stop operation due to excess power consumption Mn01 015D
Enable compensation curve for LT1 in HEATING 0= Disabled (fixed set point operation) 1= Enabled Mn01 0168
Fixed water outlet temperature set point for LT1 in HEATING Mn01 0170 °C
Enable compensation curve for LT2 in HEATING 0= Disabled (fixed set point operation) 1= Enabled Mn01 0183
Fixed water outlet temperature set point for LT2 in HEATING Mn01 0185 °C
Minimum heat pump operating time for system Mn02 0226
Maximum heat pump operating time to reach domestic hot water set point Mn02 0227
Three-way valve travel time for domestic hot water production Mn02 0231 sec.
BT1 Heat exchanger water inlet temperature probe Mn09 0900 °C
BT2 Heat exchanger water outlet temperature probe Mn09 0901 °C
BT8 Domestic hot water probe Mn09 0902 °C
BT7 Unit control air temperature probe Mn09 0903 °C
BT9 Storage tank probe Mn09 0904 °C
BT11 Outside air temperature probe for set point management Mn09 0905 °C