Technical data

57EN 10/2010 i-KI MTD / i-KIR MTD
REGOLAZIONE IMPIANTO E CARATTERISTICHE DI FUNZIONAMENTO
U I A
MAINTENANCE AND SERVICE
A
Alarm signals
When an alarm is activated, the symbol comes one.
Displaying alarms
x3 sec.
• Press the and buttons for 3 sec-
onds
• Turn the knob
• Display the alarm codes
• Press the knob to confirm
• Resolve the problem and then reset the
alarms using the procedure described in
“Resetting alarms”
1 2 3
Resetting alarms
Alarm log
The alarm log can only be displayed using the service key-
pad. Contact an authorised service centre.
The room controller can display the most recently activated
alarm code from Mn11:
- parameter 1100 = no. of alarms saved in the log (visible
only with service keypad)
- parameter 1101= code of last alarm activated
- parameter 1102= alarm activation hour
- parameter 1103= alarm activation minutes
- parameter 1104= alarm activation day
- parameter 1105= alarm activation month
- parameter 1106= alarm activation year
x3 sec.
• Press the and buttons for 3 sec-
onds
• Turn the knob
• Select
• Press the knob to confirm
• Alarms reset
1 2 3