Technical data

56 i-KI MTD / i-KIR MTD EN 10/2010
SYSTEM CONFIGURATION
U I A
System number 0
Parameter configuration
* obligatory values for the present configuration
Description Menu
Parameter
no.
Default
Write
set value
UOM
System type (table 1) Mn01 0101 0 0* -
SYSTEM compensation curves in heating mode
Enable SYSTEM compensation curve
0= Disabled
1= Enabled
Mn01 0152 0 -
SYSTEM compensation curve number Mn01 0159 1 -
Enable room temperature influence on SYSTEM
0= Disabled
1= Enabled
Mn01 0163 0 -
SYSTEM Room Authority Mn01 0164 30 %
MINIMUM return set point limit for SYSTEM curve Mn01 0165 30 °C
MAXIMUM return set point limit for SYSTEM curve Mn01 0166 48 °C
SYSTEM compensation curves in cooling mode
Enable SYSTEM compensation curve
0= Disabled
1= Enabled
Mn01 0154 0 -
Maximum outlet temperature set point limit in cooling mode (Tm1) Mn01 0128 20 °C
Minimum outside temperature corresponding to max. outlet
temperature (Te1)
Mn01 0129 23 °C
Minimum outlet temperature set point limit in cooling mode (Tm2) Mn01 0130 18 °C
Maximum outside temperature corresponding to min. outlet
temperature (Te2)
Mn01 0131 36 °C
Contact HL1 configuration, secondary circuit pump
Enable contact HL1 HIGH TEMPERATURE ZONE
The contact closes and the pump or motor-driven
shut-off valve is activated)
Mn01 015A 0 3*