Technical data

36 i-KI MTD / i-KIR MTD EN 10/2010
DESCRIPTION OR ROOM CONTROLLER BUTTONS AND DISPLAY
A
BUTTONS
mode
1
2
3
4
7
6
5
1
3
4
7
8
10
9
5
2
6
NO. Description
1 Temperature and humidity probe
2 Domestic hot water (DHW) production button
3
ON/OFF button
ESC button in parameter programming mode
Knob
4 - Turning: scroll room temperature values,
parameters and menus
- Pressing: Confirm settings
5 Select operating mode button
6 Set time bands button
7 Backlit display
N° Description Symbol
1 Operating mode
2 Main field
3 Temperature unit of measure
4 Set point
5 Relative humidity
6 Time band
7 Day of the week
8 Actuator operating
9 Secondary field
10 Active time band
Function
Heating
Cooling
automatic mode changeover based on outside air temperature
Domestic hot water production enabled
Room temperature/humidity, room set point, parameter val-
ue display
On indicates room set point programming
Indicates the type of active time band
error message
system pump active
- flashing: compressor timer, delay
- fixed: compressor active
Defrost active
Fan active
Boiler or electric heater active
Frost protection active
Time, menu, parameter number display
On indicates active time band
DISPLAY
* Any delays in the "compressor" symbol switching off are due to the PI calculation of the compensation curve.