User guide

500151R07
DAVISCOMMS (S) PTE LTD
Daviscomms Confidential Page 8 of 39
f. GSM/GPRS antenna (SMA right angle)
The receiver component required to receive GSM/GPRS data to the MTD1000
device in a network cell location.
g. Li- Polymer battery for MTD1000
An alternative solution to power up the MTD1000 without a power adaptor up to
24 hours.
Voltage/ current specification: (3.7V/ 780mAh)
h. Evaluation PCB board (For development purposes on the MTD functionalities)
Allows you to enable or disable the input/output of the MTD1000 through this device.
i. 10 pin male/male data cable harness for evaluation kit
For connection from the evaluation board to the MTD1000 device
j. 10 pin male data cable harness (colored cable / open ended)
For connection from the MTD1000 device with open ended wires.
(Accessory option with MTD 1000 only)
k. 2 pin power connector
For connection from the MTD1000 device with open ended wires.
(Accessory option with MTD 1000 only)