User Manual

14 310-2200 EZT
®
Table 5. Required Tools
Miscellaneous
310-2200 Service & Repair Manual
Flat Blade Screw Driver (2)
Torque Wrench
Air Impact Wrench
Rubber Mallet
Breaker Bar
Side Cutters/Snips
Pliers
Needle Nose
Large External Snap Ring
Small Internal Snap Ring
TOOLS AND TORQUES
Sockets
1/2”-3/8” Adapter
3/8” Deep
1/2” Deep
7/16” Deep
9/16” Deep
3/4” Deep
13/16” Deep
7/8”
T-25 Torx Head
T-40 Torx Head
Apex AN-08
Table 6. Required Torque Values
Operation Torque Item Description
Side Housing Screws 135-185 lb-in [15-21 Nm] 9 Screw 1/4-20 x 1.25
Control Arm Screw 230-310 lb-in [26-35 Nm] 25 Screw 5/16-24 x 1
Control Arm Stop Stud 50-120 lb-in [6-18 Nm] 21 Stud 5/16-24
Center Section Bolts 525-700 lb-in [60-80 Nm] 12 Screw 3/8-24 x 2.5
Check Plugs 200-360 lb-in [23-41 Nm] 56 Check Plug Assembly
Expansion Plate Screws 25-50 lb-in [3-6 Nm] 53 Screw 10-32 x 0.50
Fan/Pulley Lock Nut 360-520 lb-in [41-59 Nm] 122 Lock Nut 1/2 x 20
Cog Brake Bolt 80-120 lb-in [9-14 Nm] 55 Bolt 1/4-20 x 1
RTN Adjustment Screw 85-120 lb-in [10-14 Nm] 131 Screw 5/16-24 x 1.00
Hub Nut 100-160 lb-ft [136-217 Nm] 99 Nut, Hex 3/4-16 Lock
www.mymowerparts.com
Hydro Gear Parts or New Units Call 606-678-9623 or 606-561-4983