Datasheet
LA010802B © 2008 Navman Wireless OEM Solutions. All rights reserved. Proprietary information and specications subject to change without notice.
Pin Signal Notes
1 AuxOut2 DO NOT CONNECT
2 Clock
Bi-directional I/O. Keyboard clock.
(keyboard provides pull-up)
3 Data
Bi-directional I/O. Keyboard data.
(keyboard provides pull-up)
4 AuxOut1 DO NOT CONNECT
5 VCC +5 VDC power out: Max 100 mA
6 Ground Ground
Table 2-4. Pin-out of keyboard RJ12 socket.
2.6.3 Supplied RJ45 Cable Specication
The MDT-860 is supplied with a 2.9m (9.5 foot) power and data cable. This has an RJ45
plug at one end and eight-wire tinned (ying) leads at the other (see Table 2-6 below for
conguration).
Pin Open lead
1 Orange-white
2 Orange
3 Green-white
4 Blue
5 Blue-white
6 Green
7 Brown-white
8 Brown
Table 2-5. Pin-out of standard supplied RJ45 cable.
Please Note: The Software Development Kit requires a MDT programming cable. This is
a Y cable with a RJ45 plug (connects to MDT-850/860), DB9 female connector (connects
to PC) and tinned ying leads (connects to power and ground). Part number CB000054-G.
2.7 Environmental
Environmental operating conditions:
• operating temperature (Topr): –25ºC to +60ºC
• storage temperature (Tstg): –40ºC to +85ºC (25ºC typical)
• humidity
: up to 95% non-condensing or a wet bulb temperature of +35ºC
• vibration: random vibration IEC 68-2-64
• max. vehicle dynamics: 500 m/s
• shock (non-operating): 50 G peak, 11 ms
2.7 Compliances
The Navman MDT-860 complies with the following:
• Directive 2002/95/EC on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS)
The MDT-860 is compliant with the following EMC specications:
• EN 55022, EDITION, 1998.