Operating instructions

Operating manual English

Troubleshooting

If you have any further questions, please contact your authorised dealer on site.

Error Cause Remedial action

Engine does not start. Connection cable not connected

or defective.

Check and plug in cable; if required replace

or have it repaired by a specialist.

Household fuse overloaded. Switch on fuse; if required increase the

fused house connection or have one

installed by a specialist.

Operating switch defective. Have it repaired by a specialist company

Motor suddenly stops. Plug has become loose. Check cable, ensure that it is attached to

the cord grip, insert plug again.

The engine has no power or the

unit is not vacuuming/blowing.

Vacuum bag full. Empty the vacuum bag.

Damaged vacuum/blow turbine. Have defective parts replaced by

a specialist company.

Blocked vacuum/blow pipe. Remove and clean vacuum/blow pipe.

Strong vibrations. Damaged vacuum/blow turbine

or other parts.

Switch off the unit immediately.

Have defective parts replaced by

a specialist company.