Technical data

UPS MTD-XL
UPS Device Description
MTD series
44
3.4 Connection of the Accumulator Modules
The connection of the accumulator modules may only be performed by a
trained electrician who is familiar with the product and the inherent haz-
ards.
The accumulator modules may only be connected while the units are
switched off. Before connecting the accumulator modules, make sure
that no appliances are connected to the UPS. Even when switched-off,
the UPS and the accumulator modules can carry high voltages.
Please follow these steps for the connection of the accumulator modules:
1 Snap lock
2 Display
Fig. 3-4 - 1 Remove display
 Press the snap lock (1).
 Pull the control panel (2) carefully forward and from the housing.
1 2