Technical data

UPS MTD-XL
UPS Device Description
MTD series
29
The plug-in connectors "UPS-Output" and "Mains-Input" are on mains po-
tential when connected.
However, there can still be a dangerously high voltage on the plug-in
connectors even while disconnected, due to device-internally loaded ca-
pacities.
As soon as mains input voltage is present, the loading unit is automatically
activated. I.e. the internal battery bank is already being charged, even though
the UPS has not been switched on.
3.2.1 UPS-output
IEC connector sockets 10 A (MTD-XL 3000 version additionally a 16 A IEC
connector socket) for the connection of appliances.
The protective earth conductor must be connected!
Please always note the specified input voltage on the identification tag or
in the technical specifications in this operating manual respectively.
3.2.2 Input and output overvoltage protection
Overvoltage protection for phone, fax or modem.