Manual

SECTION 1: FINDING YOUR MODEL NUMBER

This Operator's Manual is an important part of your new edger. It will help you assemble, prepare and

maintain your edger. Please read and understand what it says.

Before you start to prepare your edger for its first use, please locate the model plate and copy the information

from it in this Operator's Manual. The information on the model plate is very important if you need help from

your dealer or the MTD customer support department. See Figure 1.

• Every edger has a model plate. You can locate it by standing in the operating position behind the unit

and looking down at the rear of the frame.

×XX-X-XXX-X-XXX XXXXXXXXXXX

..oooc.s,.c

CLEVELAND, OHIO 44136 .,

This is where your model number will be.

This is where your serial number will be.

Copy the model number here:

Copy the serial number here:

Figure 1

SECTION 2: CALLING CUSTOMER SUPPORT

• LOCATE YOUR MODEL NUMBER AND SERIAL NUMBER -- Record this information in the space

provided. To find your unit's specific model number and serial number, see SECTtON 1: FINDING

YOUR MODEL NUMBER.

• If you are having difficulty assembling this product or if you have any questions regarding the controls,

operation or maintenance of this unit, please call the Customer Support Department.

• Customer Support can be reached by dialing: 1- (330) 220..4MTD

(4683)

1- (800)-800-7310

• Please have your model number and serial number ready when you call.

• Although both numbers are important, you will be asked to enter only your serial number before your

call can be processed.