Manual

Figure 13
Figure 14
Figure 15
2. Set the adjustment lever (refer to Figure 9) in
the first or second notch at the top for beveling.
See Figure 13.
3. Set the adjustment lever (refer to Figure 9) in
the fourth or fifth notch at the bottom for
trenching. See Figure 14.
EDGING ALONG CURB (Optional)
To edge along a curb, lower the right rear wheel by
moving the height adjustment lever toward the rear
of the unit, pivoting the wheel to the desired depth
and releasing the lever. See Figure 10.
When edging the grass along a curb, the unit will
ride on the two rear wheels and the support roller
behind the blade. See Figure 15. The wheel at the
front of the unit is not used.