Service manual

39GB 01/2009 AWR MTD - AWR MTD/B
To change the set point, starting from the main display,
press the set button.
Pressing the set button once displays the various directo-
ries.
Scroll the menu using the up and down buttons until reach-
ing the SP directory.
To enter the SP directory press the set button.
SETTING THE SET POINTS
As an example, the Set Point in COOL mode will be changed from 12.0 degrees centigrade to 12.5 degrees centigrade.di.
The first mode displayed will be COOL, then scrolling with
up and down to HEAT and DHW modes (as shown on the
side).
Taking the example of changing the set point for COOL
mode.
Select COOL from the menu and press the set button.