User`s manual

Lake Shore MTD Series Cryotest System User’s Manual
Introduction 1-3
Table 1-1. Model MTD-150 Cryotest System Specifications (Continued)
_________________________________________________________________________________________________________________________________________________
Temperature Measurement and Control:
DT-470-CU-12A silicon diode temperature sensors and 25 Ω heaters mounted on the first and second
stage heat exchangers.
NOTE: Recommend use with the optional vacuum-insulated, LHe transfer line, Model 1205, or LN
2
transfer line, Model 1210.
System Dimensions (Typical):
10 inches (25.4 cm) in diameter by 18 inches (45.7 cm) long
Net Weight (Typical):
29 pounds (13.2 kilograms)
_________________________________________________________________________________________________________________________________________________
P-MTD-1-01.bmp
Figure 1-1. Model MTD-150B with Vacuum Shroud and Radiation Shield Removed