User`s manual

Lake Shore MTD Series Cryotest System User’s Manual
Model MTD-260 Cryotest Workstation H-3
15.2 cm
(6 in.)
15.2 cm
(6 in.)
11.4 cm
(4.5 in.) *
58.4 cm (23 in.)
7
* Cover height depends on options
installed or Customer request.
1
2
3
4
56
8
9
10
11
12
13
14
15
16
17
18
19
20
21
1. DUT Clamp Assembly
2. DUT Socket
3. Fanout Board
4. Radiation Shield
5. Cold Plate
6. Micro-Coaxial Cable (100 places)
7. Pump-Out Port, NW-25
8. Vacuum Valve
9. Refrigerator Motor Electrical Connection
10. Refrigerator Gas Line Connector (2 places)
11. Cradle Base
30.5 cm (12 in.)
12. Refrigerator Expander
13. Signal Feedthru Connector (4 places)
14. First Stage Heater and Temperature Sensor
15. Second Stage Heater and Temperature Sensor
16. Quick Release Clamp (4 places)
17. Pedestal
18. Device Under Test (DUT)
19. Filter/Aperature Wheel Assembly (Optional)
20. Vacuum Chamber Cover
21. Window Port
C-MTD-H-2.eps
Figure H-2. Typical Model MTD-260B Cutaway Diagram